Bluetooth Serial Adapter

The Parani-SD1000 is a Class1 type of Bluetooth Serial Adapter that supports 100 meters of wireless transmit distance by default. The Parani-SD1000 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports Bluetooth v2.0+EDR specification. Parani-SD1000 has two battery-pack options, standard and extended battery pack. By these options, Parani-SD1000’s portability is more enhanced. The Parani-SD1000 also supports up to 4 multiple simultaneous connections.

Features:

  • Bluetooth Specification v2.0 + EDR
  • Provides transparent RS232 serial cable replacement
  • Supports up to 4 multiple simultaneous connections
  • Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm
  • Receiving Sensitivity : -88dBm(0.1%BER)
  • Supports Bluetooth profiles SPP(Serial Port Profile)
  • Interoperability with PDA, laptops etc.
  • Supports firmware upgrade via windows-based software(ParaniUpdater)
  • Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna
  • Enhanced portability : standard & extended battery pack options
  • Easy to use Windows configuration tool available.
  • No external drivers required.
85,00 Excl.vat

28 in stock

Specifications

What is included

Downloads

Serial Interface Serial speed up to 921.6kbps
CTS/RTS flow control, DTR/DSR for loop-back & full transfer
Bluetooth Interface Bluetooth v2.0 + EDR
Class 1
Profiles – SPPWorking distance (in open field)

SAT-G01R
SAT-G01R
DAT-G01R
DAT-G01R
DAT-G01R
DAT5-G01R
DAT5-G01R
PAT-G01R







SAT-G01R
DAT-G01R
DAT-G01R
DAT5-G01R
PAT-G01R
DAT5-G01R
PAT-G01R
PAT-G01R
100 meters
150 meters
200 meters
300 meters
500 meters
400 meters
600 meters
1,000 meters

[Antennas]
SAT-G01R : +1dBi Stub Antenna
DAT-G01R : +3dBi Dipole Antenna
DAT5-G01R : +5dBi Dipole Antenna
PAT-G01R : +9dBi Patch Antenna

Max. Tx power +18dBm
Receive
Sensitivity
-88dBm
Antenna gain Stub : +1dBi, Dipole : +3dBi, Dipole : +5dBi, Patch : +9dBi
Configuration ParaniWin, ParaniUpdater
Modem AT command set
Diagnostic LED – BT Status (mode)
– Connect
– RS232-RX/TX
– Charging/Done (Battery Charging/ Battery Charging completed)
– Low Battery
Power Power input : 5~12VDC
Power Consumption : Minimum 2mA, Maximum 80mA
Common Power supply options

  • Power via a standard AC-plug DC-adapter
  • Power via USB power cable
  • Power via DC power cable
  • Power via pin 9 of DB9 connector
  • Battery Pack (Standard & Extended)
Environmental Operating temperature: -40’C to 85’C
Storage temperature: -40’C to 85’C
Humidity: 90% Non-condensing
Physical properties Dimension(LxWxH):
76 x 31 x 16 (mm) (No battery pack)
76 x 31 x 19.5 (mm) (with standard battery pack)
76 x 31 x 31.4 (mm) (with extended battery pack)
Weight:
24 g (No battery pack)
30 g (with standard battery pack)
42 g (with extended battery pack)
Battery Capacity 240 mAh(standard)
900 mAh(extended)
Charging Power minium 5V/200mA
Charging Time Approximately 2 hours (Standard)
Approximately 5 hours (extended)
Battery Life Test based on 9600 bps data loopback. Actual battery life varies by configuration, operating conditions and other factors
– Approximately 4.5 hours (standard)
– Approximately 16.5 hours (extended)
Regulatory
Approvals
FCC(A), CE, MIC, TELEC, SIG, IC
Warranty 3-year Limited Warranty

Includes:

  • SD1000 : SD1000 Bluetooth-serial adapter
  • DPA-G01 : Parani-DPA DC power cable for SD series
  • UPA-G01 : Parani-UPA USB Power Cable
  • SAT-G01R : 1 dBi Stub Antenna – RP-SMA Plug Right-hand Thread
  • FM9GD-G01 : DB9 Female to Male Gender Change